Safety Goggles: The Standard, Chemical Splash and Face Shields
Safety goggles are eye protectors that fit the contour of the face and are held in position by an adjustable headband, as the University of Western Australia's PPE guidelines define them. Which eye protection a chemical calls for is in section 8 of its Safety Data Sheet. We stock clear vented Bolle Universal goggles.
Where a Safety Data Sheet asks for eye protection
Section 8 of the Safety Data Sheet should give the type of eye protection, for example safety glasses, goggles or face shields, and the degree of impact protection or splash resistance. Safe Work Australia's code for preparing safety data sheets also brings up eye protection in sections 2 and 6, as the table shows.
| Section of the Safety Data Sheet | What it covers |
|---|---|
| Section 2, label elements | Precautionary statement P280, which can read 'Wear eye protection' |
| Section 6 | Suitable equipment, including PPE, to prevent contamination of skin, eyes and clothing |
| Section 8, type | The type of eye protection, for example safety glasses, goggles or face shields |
| Section 8, properties | The degree of impact protection or splash resistance |
The Australian standard for safety goggles
AS/NZS 1337.1:2010 is titled Personal eye-protection, Part 1: Eye and face protectors for occupational applications. Standards New Zealand describes it as setting minimum requirements for non-prescription eye and face protectors against common industrial hazards such as flying particles and fragments, dusts, splashing materials and molten metals, harmful gases, vapours and aerosols. Our page on safety glasses and face shields covers the markings on a lens.
Goggles for chemical splash
Safe Work Australia's chemicals code lists chemical resistant glasses and face shields as PPE. Among its controls for transferring chemicals between containers, it says to use eye protection and provide an emergency eye wash facility.
The code also says eyewash and safety showers should be readily accessible where corrosives are handled or transferred. Our eyewash bottle is in the eyewash and first aid range.
Goggles under a face shield
3M advises wearing secondary eye protection with all its face shields, so goggles or safety glasses go under the 3M browguard and visor. 3M lists its polycarbonate visor for impact and for water-based liquids: biological, acids and weak solvents.
Fit and care
If you also wear a respirator, try the two together. Safe Work Australia's silica code notes that some safety glasses may interfere with the fit of the respirator, and our page on respirator masks covers fit.
The University of Western Australia's PPE guidelines say lenses which have been scratched, abraded, pitted or otherwise damaged should be replaced.
ChemMan, from Lupin Systems, keeps safety data sheets in one place and works out signage and PPE from what you store. Our page on choosing PPE from a Safety Data Sheet covers the rest of section 8.
Goggles and eye protection we stock
Signs for the same area
Common questions
What is the Australian standard for safety goggles?
AS/NZS 1337.1:2010 is titled Personal eye-protection, Part 1: Eye and face protectors for occupational applications. Standards New Zealand describes it as setting minimum requirements for non-prescription eye and face protectors against common industrial hazards such as flying particles and fragments, dusts, splashing materials and molten metals, harmful gases, vapours and aerosols.
Do you need goggles under a face shield?
3M advises wearing secondary eye protection with all its face shields, so goggles or safety glasses go under the 3M browguard and visor.
When should safety goggles be replaced?
The University of Western Australia's PPE guidelines say lenses which have been scratched, abraded, pitted or otherwise damaged should be replaced.
How do I know which goggles a chemical needs?
Section 8 of the Safety Data Sheet should give the type of eye protection, for example safety glasses, goggles or face shields, and the degree of impact protection or splash resistance.
Related guides
Sources
- The University of Western Australia, Eye protection (PPE guidelines)
- Safe Work Australia, Model Code of Practice: Preparation of safety data sheets for hazardous chemicals
- Standards New Zealand, AS/NZS 1337.1:2010 Personal eye-protection, Part 1: Eye and face protectors for occupational applications
- Safe Work Australia, Model Code of Practice: Managing risks of hazardous chemicals in the workplace (November 2026)
- 3M, VC105 browguard with VV848 visor, complete unit
- Safe Work Australia, Model Code of Practice: Managing risks of respirable crystalline silica in the workplace (November 2025)
- Lupin Systems, ChemMan
Checked against the sources above on 2026-11-10.
General information, not advice for your site. What protection a job needs comes from the Safety Data Sheet, the task and your risk assessment. The statements on this page are taken from the sources listed below and were checked on the date shown. Check the source, or ask your regulator.
Which eye protection do your chemicals call for?
ChemMan, from Lupin Systems, keeps your safety data sheets in one place and works out the signage and the PPE from what you store.