Nitrile Gloves: Disposable and Chemical Grade

Updated 10 November 20265 min read

Nitrile gloves come in two kinds: single-use gloves sold by the box, and chemical gloves with a published chemical rating. Our disposable gloves come 100 to a box. Our chemical-grade nitrile gloves start with a 0.28 mm palm and are rated EN 374 Type A by Ansell.

Disposable and chemical-grade nitrile compared

The table compares the three nitrile gloves we sell, using the makers' own figures.

Glove Use Length Palm thickness Chemical rating from the maker Sizes
XtraGuard black nitrile Single use, box of 100 About 240 mm Not stated (about 6 g a glove) None published S to XXL
Solvex 37-145 Chemical handling, unlined 330 mm 0.28 mm EN 374 Type A 6 to 11
Solvex 37-185 Chemical handling to the elbow, unlined 457 mm 0.56 mm EN 374 Type A 7 to 11

Disposable nitrile gloves

Single-use nitrile gloves are thrown away after one use. The XtraGuard black nitrile gloves are powder-free, latex-free, non-sterile and ambidextrous, with a beaded cuff. Shield Right lists automotive, oil and lubricant handling, hair and beauty, hospitality, facility maintenance, construction and mining among their uses.

Shield Right does not publish a chemical test rating or breakthrough times for them. For a chemical named on a Safety Data Sheet, choose a glove that has them, such as the Ansell Solvex gloves.

Chemical-grade nitrile gloves

Ansell lists the Solvex 37-145 and the elbow-length Solvex 37-185 as EN 374 Type A. Both are unsupported green nitrile with no inner cotton flocking and a sandpatch grip. Our page on chemical gloves explains what Type A, B and C mean.

Thickness is a trade-off. OSHA notes that, as a general rule, thicker glove material gives greater chemical resistance, but thick gloves may reduce grip and dexterity. The 37-145 has a 0.28 mm palm for dexterity, and the 37-185 a 0.56 mm palm.

What nitrile resists, and what it does not

OSHA says nitrile gloves protect against oils, greases, acids, caustics and alcohols, and chlorinated solvents such as trichloroethylene. It says they are generally not recommended for strong oxidising agents, aromatic solvents, ketones and acetates.

For chemicals outside that list, a different material may suit. Ansell lists the AlphaTec 53-002 gauntlet, neoprene with a laminate film, at 17 of 18 chemicals on EN 374:2016.

A rating is a starting point, not a wear time. Ansell states that permeation times do not equate to safe wear time, and its chemical resistance guide says the suitability of a glove for a specific job must be determined by testing by the purchaser.

Choosing a nitrile glove from the Safety Data Sheet

Start with section 8 of the Safety Data Sheet. Safe Work Australia's code for preparing safety data sheets says it should name the types of gloves required and their properties, for example cotton, PVC or nitrile.

AS/NZS 2161.1:2016 covers the selection, use and maintenance of occupational protective gloves. Standards Australia describes it as recommendations to help users select gloves suitable for their work.

ChemMan, from Lupin Systems, keeps safety data sheets in one place and works out signage and PPE from what you store. Our page on choosing PPE from a Safety Data Sheet covers the rest of section 8.

Nitrile gloves we stock

Signs for the same area

Common questions

What is the difference between disposable and chemical nitrile gloves?

Disposable nitrile gloves are thrown away after one use, and ours carry no published chemical rating. Chemical-grade nitrile gloves do: Ansell lists the Solvex 37-145 and the elbow-length Solvex 37-185 as EN 374 Type A.

What chemicals are nitrile gloves not good for?

OSHA says nitrile gloves protect against oils, greases, acids, caustics and alcohols, and chlorinated solvents such as trichloroethylene. It says they are generally not recommended for strong oxidising agents, aromatic solvents, ketones and acetates.

Are thicker nitrile gloves better?

OSHA notes that, as a general rule, thicker glove material gives greater chemical resistance, but thick gloves may reduce grip and dexterity.

Are disposable nitrile gloves rated for chemicals?

Shield Right does not publish a chemical test rating or breakthrough times for them. For a chemical named on a Safety Data Sheet, choose a glove that has them, such as the Ansell Solvex gloves.

Related guides

Sources

Checked against the sources above on 2026-11-10.

General information, not advice for your site. What protection a job needs comes from the Safety Data Sheet, the task and your risk assessment. The statements on this page are taken from the sources listed below and were checked on the date shown. Check the source, or ask your regulator.

Which gloves do your chemicals call for?

ChemMan, from Lupin Systems, keeps your safety data sheets in one place and works out the signage and the PPE from what you store.

See ChemMan